- Introduction
- Features
- Technical
- Send Inquiry
ROR-4(II) series four-way return optical receiver can adjust the
input signal on/off ( RFOG Function) automatically or manually, and which greatly curbs the overall network noise. With its AGC
function to make sure stable output signal even the signal changed in a wide
range;
l Optimized circuit design, SMT process production, optimized signal path, make the photoelectric signal transmission more smooth.
l SCM control working status, LCD displays the parameters, convenience and intuitive operation, and stable performance.
l Excellent AGC characteristic, keep stable output level in the received optical power range -10~0dBm.
l Can switch to burst mode, greatly reduced the link aggregation noise; with single way RF shut off function, the localization diagnosis of ingress noise is easy.
l Support dual power supply hot backup mode and four-way mixed output mode.
l Reserved data communication interface, can connect with class II network management responder, access to network management system.
Item |
Unit |
Technical Parameters |
||
Receiving OpticalPowerRange |
dBm |
-10~0 |
||
OpticalAGCRange |
dBm |
-10~0 |
||
Nominal Optical Wavelength |
nm |
1100~1600 |
||
Optical Fiber Connector Type |
|
FC/APC, SC/APC |
||
Optical Return Loss |
dB |
>45 |
||
Frequency Range |
MHz |
5~200 |
||
Output Level |
dBμV |
≥105 |
||
Flatness in Band |
dB |
±1 |
||
Return Loss |
dB |
≥ 16 |
||
Output Impedance |
Ω |
75 |
||
Adjustment Range of Output Level |
dB |
10 (Normal mode, turn on the optical AGC function) |
||
30 (Normal mode, turn off the optical AGC function, adopt MGC control) |
||||
30 (RFOG burst mode) |
||||
The Accuracy of RFTestPort |
dB |
-20±1 |
||
Isolation between channels |
dB |
>65 |
||
RF connector type |
|
Female F connector or male F connector |
||
NPR DynamicRange |
dB |
≥15 (NPR≥30 dB) Use DFB laser |
≥10 (NPR≥30 dB) Use FP laser |
|
Supply Voltage |
V |
AC90V-250V/50Hz or DC -48V |
||
Consumption |
W |
20 |
||
Operating Temperature |
℃ |
-20~ +45 |
||
Storage Temperature |
℃ |
-20 ~ +65 |
||
Relative Humidity |
% |
Max 95% no condensation |
||
Dimension |
mm |
483 (L) × 365 (W) × 44 (H) |
Note: The nonlinear distortion index, link flatness and noise power ratio dynamic
range are the indexes of link that is composed of return optical transmitter
and return optical receiver.
Burst Mode* |
|||
Laser turn on threshold |
dBμV |
≥70 |
|
Laser turn off threshold |
dBμV |
≤62 |
|
Laser turn on time (t1) |
us |
0.5≤ t1 ≤1 |
|
Laser turn off time (t2) |
us |
0.5≤ t2 ≤1.5 |