- Introduction
- Features
- Technical
- Send Inquiry
This is our newly designed field bidirectional AGC with high gain amplifier. It is adopt optimized circuit design and scientific and rational process. High performance AGC control circuit inside is useful for stable gain and low distortion. It's the best choice for large and medium-sized bidirectional CATV transmission network.
* Forward path pre-stage adopts the original low noise GaAs push-pull module to make sure good performance
* Return path adopts original reverse dedicated amplify module to achieve low distortion and high SNR.
* Plug-in duplex filter, fixed equalizer and attenuator and plug-in output splitter which more easy to debug
* With AGC or MGC optional
* With aluminum waterproof housing, high reliability switching power supply and strict lightning protection system
Item |
Unit |
Technique Parameter |
|||||||
Downlink Transmission Path |
|||||||||
Frequency Range |
MHz |
47/85 ~860/1000 |
|||||||
Rated Gain (@FZ110) |
dB |
30 |
34 |
36 |
38 |
||||
Minimum Full Gain(@FZ110) |
dB |
≥30 |
≥34 |
≥36 |
≥38 |
||||
Rated Input Level |
dBμV |
72 |
|||||||
Rated Output Level |
dBμV |
106/108 |
|||||||
Flatness in Band |
dB |
±0.75 |
|||||||
Noise Figure |
dB |
≤ 10 |
|||||||
Return Loss |
dB |
≥ 16 |
|||||||
Attenuation |
dB |
1-18 (Fixed insert,1dB stepping, according to user requirements) |
|||||||
Equilibrium |
dB |
1-15(Fixed insert,1dB stepping, according to user requirements) |
|||||||
C/CTB |
dB |
≥69 |
Test condition: 79 channels signal, output level: 53MHz/550MHz/750MHz. 99dBuV/105dBuV/108dBuV |
||||||
C/CSO |
dB |
≥67 |
|
||||||
AGC Pilot Carrier Frequency |
MHz |
168.25(or up to users) |
|||||||
AGC Characteristic |
dB |
±4(Input)/±0.5(Output) |
|||||||
Group Delay |
ns |
≤ 10 (112.25 MHz/116.68 MHz) |
|||||||
Signal to Hum Ratio |
% |
< 2 |
|||||||
Gain Stability |
dB |
-1.0 ~ +1.0 |
|||||||
Uplink Transmission Path |
|||||||||
Frequency Range |
MHz |
5 ~ 42/65 |
|||||||
Rated Gain (@FZ110) |
dB |
12 |
16 |
20 |
24 |
||||
Maximum Output Level |
dBμV |
≥ 110 |
|||||||
Flatness in Band |
dB |
±0.75 |
|||||||
Noise Figure |
dB |
≤ 12 |
|||||||
Return Loss |
dB |
≥ 16 |
|||||||
Carrier to Second-order Inter-modulation Ratio |
dB |
≥ 52 |
Test Condition: Output level is 110dBuV, test points: F1=10MHz, f2=60MHz, f3=f2-f1=50MHz |
||||||
Group Delay |
ns |
≤ 20 (57MHz/59MHz) |
|||||||
Signal to Hum Ratio |
% |
< 2 |
|||||||
General Characteristic |
|||||||||
Characteristic Impedance |
Ω |
75 |
|||||||
Test Interface |
dB |
-20±1 |
|||||||
Supply Voltage |
V |
A:AC(135 ~ 250)V;B:AC(35 ~ 90)V |
|||||||
Impulse Withstand Voltage(10/700μs) |
kV |
> 5 |
|||||||
Power Consumption |
W |
22 |
|||||||
Dimensions |
mm |
247*205*123 |